CALL US: 01709 710 730
POINTS 0 | BASKET | ITEM(S) 0 | £0.00
SEARCH     
CLOSE SEARCH
Facebook Instagram Twitter X Youtube Tiktok WhatsApp
HOME /Tubeless Sealant, Valves, Rim Tape and Kits/Race Matrix Rim Tapes/

Uberbike Race Matrix 10m Rim Tape - 22mm 26mm 30mm 35mm Width Options

Uberbike Race Matrix 10m Rim Tape - 22mm 26mm 30mm 35mm Width Options. Close up of Uberbike Rim Tape. Uberbike Race Matrix Rim Tape.
TUberbike Race Matrix 10m Rim Tape - 22mm 26mm 30mm 35mm Width Options. TClose up of Uberbike Rim Tape. TUberbike Race Matrix Rim Tape.

Uberbike Race Matrix 10m Rim Tape - 22mm 26mm 30mm 35mm Width Options

SKU : UB-RT22
(0 Reviews)  Review this item

The Uberbike Race Matrix range of tubeless rim tapes are available in 4 popular width options, each creating an air-tight seal with ease of fitment and strong adhesion to the rim, leaving no sticky residue once removed. The reduced thickness of the tape allows it to better contour the rim profile but still retains superior strength for high-pressure applications, with its low friction surface finish helping tyre beads to pop into place easier during tyre installation. The 10m roll is enough for 4 29" wheels. Match the tape width with the internal width of your rim, using the next rim tape size up if you are unable to find the exact match. Use our general guide below to help choose your rim tape width.

  • Road/Gravel - 22mm wide x 10m.

  • XC/Trail - 26mm wide x 10m.

  • DH/Enduro - 30mm wide x 10m.

  • DH/Enduro Wide/eMTB - 35mm wide x 10m.

Select the rim tape width using the dropdown menu below

IN STOCK
£9.99
Earn 25 loyalty points
Spend over £30 and split your purchase into three interest-free payments
Trustpilot

Installation Guide

  • Before installing your new rim tape, ensure that you clean the inside of the rim thoroughly with Isopropyl Alcohol. Once dry, you can then start applying the tape, placing the first part of tape between the 1st and 2nd spoke hole next to the valve hole, going over and covering the valve hole first, before working around the rest of the rims circumference.

  • The tubeless tape needs to be applied tight and evenly, pressing firmly into the rim bed, working out any air bubbles or creases as you go along to ensure an airtight seal. Finish the tape by overlapping 15cm and trim off neatly.

  • Locate the valve hole in the rim. Make a small hole in the tubeless tape with a sharp, pointy object and install the tubeless valve into the rim.
WhatsApp
Shop with confidence, fast easy & secure
SITE DEVELOPED BY EDORU
©2021 UBERBIKE COMPONENTS LTD - ALL RIGHTS RESERVED - VAT 137235521 / CO # 7270279