The Uberbike Flatout pedal has been designed for those riders who seek a larger pedal platform combined with a concave feel for the ultimate traction and grip in all riding conditions. Suitable for all MTB riding styles and disciplines, including Enduro, All Mountain and Downhill. The Flatout pedal now comes supplied with both the original fit pins, plus our brand new Shark pedal pins, providing even greater levels of grip and traction, should you require this over our standard Flatout pins.

• The pedal body is produced from tough extruded 6061 alloy, with a slim 17mm deep profile and a large 105x105mm platform. Because of the thinner body design, they can be made with bigger pedal platforms whilst still offering similar clearances of taller/smaller pedal designs, whilst increasing your shoe contact area for maximum control and support.
  
  
• The Flatout pedal offers plenty of concavity, with a scooped out axle to help keep your feet firmly planted under the most demanding trail conditions, using a staggered pin height to further add to the concave feel of the pedal, making it quick and easy to reset your foot back on the pedal in the correct position.
  
  
• There are 12 x replaceable pedal pins per side, using recessed pins close to the axle to further enhance the concave feel of the pedal and to achieve the ultimate level of traction and grip in all riding conditions. Over time, pedal pins will inevitably be subject to rock strikes and impacts. For this reason, we have chosen to top mount our pins, making it much easier to replace than bottom mounted pins, which can cause damage to the pedal body when trying to remove damaged or bent pins. Choose between our standard fit pins or our brand new Shark pedal pins, providing even greater levels of grip and traction, should you require this over our standard Flatout pins.
  
  
• The Flatout pedals spin on robust 4140 CroMo steel axles, which are paired with a high load DU bush and a sealed cartridge bearing, with a pedal shaft double lip seal to protect the pedal internals from dirt and moisture. For when the time comes, we have everything you need to refresh your Uberbike Flatout pedals, from replacement pedals pins, axles, to a full service rebuild kit.
  
  
• The Flatout pedal measures a foot reassuring 105(L)x105(W)x17(D), but with the use of lightweight but strong 6061 alloy for the pedal body, we are able to keep the weight down to just 219g per pedal.
  
  
• Boasting the same internal running components which can be found in other high end pedal manufacturers, which are twice the cost. We are able to achieve this by utilising our direct to consumer supply chain, cutting out costly retailer margins.
  
  
• Pedal service kits and replacement pins available (sold separately). Watch our 'How to Service the Uberbike Flatout Pedal' video HERE