Uberbike E-Matrix 220mm 6 Bolt Disc Brake Rotor - 2mm Thickness

220
T T T220

Uberbike E-Matrix 220mm 6 Bolt Disc Brake Rotor - 2mm Thickness

SKU : UB-220-RAW
(0 Reviews)  Review this item

The Uberbike E-Matrix Disc Brake Rotor is a 220mm diameter 1-piece design, manufactured from SUS410 stainless which has been selected for its excellent strength, weight, and thermal management properties in use. 220mm rotors not only provide an increase in brake power by using the same level of lever force as used on a 203mm rotor, but also increases pad life. At 2.0mm thick, the rotor is able to dissipate heat more efficiently under braking, maintaining a consistent brake feel under hard braking whilst providing additional strength and rigidity. The braking surface features multiple elongated cutouts which allow dirt, mud, and water to be quickly shed from the rotor and disc pads, as well as providing even pad wear.

  • Brake Band Thickness 2.0mm.

  • Finish - Raw SUS410 Stainless with Uberbike Logo.

  • Supplied with 6 x steel mounting bolts.

  • Weight 202g.

  • Compatible with 6 bolts hubs and disc pad compounds, including metal pads.

  • Note - Our standard rotors are 1.8mm thick, check to make sure your brake has sufficient clearance to accept a 2.0mm wide disc

  • Fitting Note - To achieve the best braking results and performance from your new rotor, we recommend the installation of new disc brake pads to ensure even rotor wear without causing damage as a result of uneven/worn disc pads.
IN STOCK
£32.99
Earn 82 loyalty points
Spend over £30 and split your purchase into three interest-free payments

Features

  • 220mm diameter 1-piece design, manufactured from SUS410 stainless which has been selected for its excellent strength, weight, and thermal management properties in use.

  • 220mm rotors not only provide an increase in brake power by using the same level of lever force as used on a 203mm rotor, but also increases pad life.

  • Brake Band Thickness 2.0mm.

  • Finish - Raw SUS410 Stainless with Uberbike Logo

  • Supplied with 6 x steel mounting bolts.

  • Available in 160 /180 /203mm sizes.

  • Weight 202g.

  • Compatible with 6 bolts hubs and disc pad compounds, including metal pads.

  • Note - Our standard rotors are 1.8mm thick, check to make sure your brake has sufficient clearance to accept a 2.0mm wide disc.

  • Fitting Note - To achieve the best braking results and performance from your new rotor, we recommend the installation of new disc brake pads to ensure even rotor wear without causing damage as a result of uneven/worn disc pads.

Shop with confidence, fast easy & secure
SITE DEVELOPED BY EDORU
©2021 UBERBIKE COMPONENTS LTD - ALL RIGHTS RESERVED - VAT 137235521 / CO # 7270279